Professional Tile and Grout Cleaning in Tacoma, Restore Your Floors
Tile flooring is beautiful, durable, and easy to maintain, until the grout lines turn dark, dingy, and impossible to clean. Rick’s Family Carpet Care provides professional tile and grout cleaning that turns dirty, stained floors back to their original brilliance.
Ready to see your beautiful floors restored? Call (253) 988-0522 or request an estimate. We’ve been serving homes and businesses throughout the greater Tacoma-Puyallup area Since 1977.
Why Tile & Grout Get So Dirty (And Why DIY Doesn’t Work)
You mop regularly. You scrub. You’ve tried every grout cleaner at the store. Yet your grout lines still look dark, dingy, and dirty.
Unlike tile’s smooth, sealed surface, grout is naturally porous, with microscopic holes and spaces. Every time you walk on your tile floor, cook in your kitchen, or shower in your bathroom, dirt, oils, soap scum, and bacteria get pushed deep into these pores.
Our professional tile and grout cleaning uses 1,110 PSI of cleaning power to reach deep into grout pores, breaking up embedded soil and extracting it completely. That’s why our results are so
dramatically different from DIY attempts.
Why Our Professional Steam Tile and Grout Cleaning Is Effective
Rick’s Family Carpet Care has perfected tile and grout cleaning Since 1977. Our steam cleaning technique is the most effective method for restoring tile and grout. It’s safe for all tile types when performed correctly by trained professionals.
Our truck-mounted steam cleaning system delivers 1,110 PSI of cleaning power, driving hot water deep into grout pores, dislodging embedded dirt that’s been trapped for years. Our superheated 200-degree water kills 99.9% of bacteria and mildew and breaks the molecular bonds of stubborn stains.
Grout Sealing & Protection Services
Professional grout cleaning removes years of embedded dirt, but without sealing, your grout will start absorbing stains again immediately. Grout sealing is one of the smartest investments you can make after professional tile and grout cleaning.
Think of it like waterproofing your grout. Spills and dirt sit on the surface instead of soaking in, making them easy to wipe away.
Frequently Asked Questions About Tile & Grout Cleaning
How long does tile and grout cleaning take?
Most residential tile and grout cleaning takes 45 minutes to 1.5 hours. A typical bathroom (50 to 75 sq ft) takes about 45 minutes, and an average kitchen (100 to 150 sq ft) takes 1 to 1.5 hours. Heavily soiled grout can add time, and large commercial spaces may take several hours or multiple days. Your quote will include an accurate time estimate.
How long does tile and grout take to dry after cleaning?
Tile is usually dry enough to walk on within 30 minutes. Grout is touch-dry in about 1 hour and fully dry in 2 to 3 hours. Our truck-mounted extraction pulls out far more water than rental machines, so floors dry faster. Keep foot traffic light until everything is fully dry. If we seal your grout, plan on an extra 30 to 45 minutes for application and up to 24 hours before the sealed areas get wet.
Can you remove all stains from grout?
We can remove most grout stains, but not all of them. Steam cleaning lifts 90 to 95% of common stains, including embedded dirt, food and drink spills, and soap scum. Some stains soak in too deep or chemically bond with the grout and won’t fully come out. If grout is damaged, replacing it may be the better fix. We’ll give you an honest assessment during our pre-inspection, before any work starts.
Is professional tile cleaning safe for natural stone?
Yes, when the right products and methods are used. Marble, travertine, slate, and granite can etch or dull from acidic cleaners, so we use pH-balanced, stone-safe solutions and adjust pressure for your specific stone. If there’s any concern, we test in a hidden spot first. Sealing after cleaning helps protect natural stone and bring back its natural look.
How often should I have tile and grout professionally cleaned?
Most homes should have tile and grout professionally cleaned every 12 to 24 months. How often depends on how the space is used:
- Showers and entryways: every 12 months
- High-traffic kitchens and daily-use bathrooms: every 12 to 18 months
- Light-use areas: every 18 to 24 months
- Commercial spaces: every 6 to 12 months
Sealed grout stays clean longer, which can stretch the time between cleanings. Weekly mopping with a pH-neutral cleaner also helps.
Should I seal my grout after cleaning?
Yes. Freshly cleaned grout is porous and starts absorbing dirt, moisture, and stains right away unless it’s sealed. Sealer soaks into the grout and forms an invisible barrier that repels water, oil, and spills, so they stay on the surface where they can be wiped up. We can usually seal grout and some natural stone right after cleaning.
Can you clean shower tile?
Yes. Freshly cleaned grout is porous and starts absorbing dirt, moisture, and stains right away unless it’s sealed. Sealer soaks into the grout and forms an invisible barrier that repels water, oil, and spills, so they stay on the surface where they can be wiped up. We can usually seal grout and some natural stone right after cleaning.
Ready for Sparkling Clean Tile & Grout?
Professional tile and grout cleaning experts serving Tacoma, Puyallup, Spanaway, Graham, Yelm, McKenna, Roy, Lakewood, Steilacoom, Dupont, Lacey, Tumwater, University Place, Federal Way, Gig Harbor, Sumner, Edgewood, Milton, Kent, Auburn, and Fife since 1977.